The Speedrooter 92R with power cable feed makes the job of drain cleaning easier, faster and cleaner for your customers. Instead of wrestling with a manual snake in and out of the line, the power cable feed drives the cable into the line at up to 20 feet per minute. Put the feed in reverse and it retracts the cable easily too. Some cables weigh up to 100 lbs. so this is a real labor savor.
The power cable feed and guide tube combination allows the cable to feed smoothly into the line while keeping your customer’s hands clean and away from the spinning cable.
The Speedrooter is job tested tough. From its frame braced at key stress points, to General’s exclusive Flexicore® wire rope center cable that’s so tough it carries a one year warranty, the Speedrooter can really take a beating.
Its field tested design offers easy handling. One person can easily load it onto a truck, as the machine slides smoothly from the loading wheel to the handle to the stair climbers and finally to the wheels. The handle is tall enough to make it easy to move to the job, yet quickly folds to take less room in the vehicle.
A drum holds 100 feet of 3/4” or 5/8” Flexicore® cable and has a see-through inner cage, so you can quickly see how much cable is left in the drum
One person easily loads the Speedrooter 92 onto a truck. The swept-back handle and loading wheel give you the needed leverage.
Portability, Convenience and Safety
Equipped with 10" heavy-duty wheels, stair climbers, tool box and ground fault circuit interpreter.
V-belt Stair Climbers
V-belt stair climbers like the ones used to move heavy furniture and appliances let you take the Speedrooter 92R up a flight of stairs yourself.
Greatly increases the efficiency of power cable feed by reducing cable whipping and drag. Keeps your hands off of the spinning cable. Tube is 30” long. Five foot extensions are made of rigid conduit with a flexible spring end.
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870
A momentary contact reverse switch protects the cable by preventing the operator from running the machine in reverse for more than a few seconds at a time.
Cutter Set for 5/8" & 3/4" Cables – Catalog #SRCS-R
(Gets water flowing)
For cutting and scraping
3" Heavy Duty Side Cutter
For cutting and scraping
3" Heavy Duty Saw Blade
For roots and other stoppages
Large Retrieving Tool
For removing loose objects and broken cables
Speedrooter 92R (Open Drum) Units – Complete and Ready to Operate
The following units, which are COMPLETE AND READY TO OPERATE, consist of Speedrooter 92 R (basic unit), 1/3 hp heavy duty motor, capacitor start, thermal overload protection, Forward/Off/Momentary Contact Reverse Switch.10” Heavy-Duty Wheels and Folding Handle, Air Foot Switch, Safety Slip Clutch, and equipment as indicated.
ft. x 3/4” (100EM5) cable, SRCS-R cutter set, Power Cable Feed and Guide Tube
100 ft. x 5/8” (100EM4) cable, SRCS-R cutter, Power Cable Feed and Guide Tube
BOLD listing denotes the best-selling model.
Speedrooter 92R – Specifications
lbs. (52 kg) without cable
deep, 22” wide, 41” high (66 cm x 56 cm 104 cm)
Drum holds 100 ft x 3/4” or 5/8” cable (30 m x 19 mm or 17 mm).
two knobs, remove ringbolt, and lift off.
Motor: 1/3 hp heavy duty, capacitor start, thermal overload protection, Forward/Off/Momentary Contact Reverse Switch.
with no electrical contact between pedal and motor.
and retracts at variable speeds of up to 20 ft. per minute.
Tube: Keeps operators hands clean and off spinning
cable. 5 ft. extensions
Heavy-duty wheels with roller bearings.
V-belts running on nylon rollers.
machine in place on the job or in the truck.
Folding Tall enough to make it easy to move to the job, yet
quickly folds to take less room in vehicle.
one person to lift machine onto bed of truck.
to rear of machine. Holds all
double-reinforced palm for hand protection when guiding cable.
wound Flexicore® wire rope center 3/4” diameter for 4” to 10” lines and 3”
lines without sharp bends; 5/8” diameter for 3” to 6” lines.
Cutters: SRCS-R Cutter Set for 5/8”
and 3/4” cables
SHD Spear Head
2UC 2” U-Cutter
3HDSC 3” Heavy Duty Side Cutter
3HDB 3” Heavy Duty Saw Blade
RTR-2 Large Retrieving Tool